SK Birvik-Stroy. Lysva, Russia

When comparing prices, pay attention to the kit!!!

Attention!!! The calculation set is made in the outer walls.

The kit houses of timber includes:

Home of the timber we use in construction timber 200*150 (wall thickness 200), which is suitable for living.

shipping (up to 40km) and unloading materials on the site (special machinery)
FOUNDATION:
digging of the soil under the Foundation in the summer (we Recommend digging the soil and under utilities - not included)
installation of formwork reinforcement casting of the concrete height of 1 meter, width 40 cm (belt pile Foundation, monolithic slab or screw piles in winter)
produhi in the tape base 6 pieces
BOX
the walls of timber with size of 200*150mm, chamfered in order to not accumulate moisture, planed on both sides. When assembling the timber joints are laid jute (suitable for living not only country option).
The fifth panel by the customer (from a bar of 100*150)
The possibility of manufacturing of balcony and verandas
mezhventsovogo insulation jute
birch dowel with a diameter of 25 mm, hardware
the beams cross-section 150 x 100 mm (intermediate floors - timber treated with 3 sides planed bevelled)
the rough floor of 1 floor of not planed edged boards 50 mm thick
the rough floor 2 floor from not planed edged boards 50 mm thick
ROOF:
Moving truss system Board 50 x 200 mm
Rafters every 57-58cm
crate edged Board 25 mm thick
Counter lathing - bar 50*30mm
Gables chopped
the gable roof is metal with the preparation for the insulation (wind fabric)
HEIGHT:
House of beam : height of the first floor 2.55 m , a height of the second floor 0.90 m from the floor of the second floor to the roof ridge height up to 3 m depending on the angle of the roof